http://forums.ma240sx.net/ Sat, 31 Jul 2010 22:58:15 +0000 MyBB http://forums.ma240sx.net/showthread.php?tid=5238 Sat, 31 Jul 2010 16:38:59 -0600 http://forums.ma240sx.net/showthread.php?tid=5238



PU is Rockville.
PM me if you are interested.
Thanks.]]>



PU is Rockville.
PM me if you are interested.
Thanks.]]> http://forums.ma240sx.net/showthread.php?tid=5237 Sat, 31 Jul 2010 14:34:06 -0600 http://forums.ma240sx.net/showthread.php?tid=5237
They are not blown and there are no leaks.Im selling these cause' I have fully adjustable teins now.

There is one problem with one of the rear coilovers: My friend broke the stud(I took a picture of it below) but I still installed them regardless about 5 months ago and had no problem.They don't come with any other hardware when I brought them they didn't come with anything else.


$300 OR BEST OFFER




]]>
They are not blown and there are no leaks.Im selling these cause' I have fully adjustable teins now.

There is one problem with one of the rear coilovers: My friend broke the stud(I took a picture of it below) but I still installed them regardless about 5 months ago and had no problem.They don't come with any other hardware when I brought them they didn't come with anything else.


$300 OR BEST OFFER




]]> http://forums.ma240sx.net/showthread.php?tid=5236 Sat, 31 Jul 2010 10:59:58 -0600 http://forums.ma240sx.net/showthread.php?tid=5236






]]>






]]> http://forums.ma240sx.net/showthread.php?tid=5235 Fri, 30 Jul 2010 23:11:55 -0600 http://forums.ma240sx.net/showthread.php?tid=5235
issues
the chassis is no good
-rust
-brakes needs brake booster, i think (replaced it about a year ago and it worked great, but now has the same problem. feels like it wont lock up or something)
- it wouldnt start if it rained extremely hard. i wrapped a plastic bag over the maf because water seemed to get on it. it seemed to have worked
-ttops leak
-body damage
- wheel vibration
- really shitty rear tires (front tires are great tho)
- it seems someone did put the fuel lines in nicely. seems to leak gas if u fill it all the way up. i just fill it up 3/4th each time.
- shutters at 25% throttle at cruzing speeds, i read that the itb's just needs to be sync'ed. i just give it alittle more or less gas and it stops.
-its probably got blown struts

good
- replaced the master cylinder thing about a year ago
- always changed oil w synthetic every 3k or less (i love castrol edge)
- strong engine and trans
- heat works
- ac seems like it can be made to run. its got the 16v compressor and lines hooked up. and a retro fit kit for r134
- exhaust is great
-clear title

extra stuff
- drilled and sloted rotors
- calipers for 87
- interior parts
- set of seats
- anything aw11 related i have ill give u.

i wanted to keep it and put the engine in a ae86 shell. but i bought a miata instead. so i need this thing gone. it will make it across the country. u can daily it w historic tags if u want. throw the engine in a ae86 or aw11 shell after u beat on this shell some more. i dont care. any questions email me dkpbws2001@yahoo.com



]]>
issues
the chassis is no good
-rust
-brakes needs brake booster, i think (replaced it about a year ago and it worked great, but now has the same problem. feels like it wont lock up or something)
- it wouldnt start if it rained extremely hard. i wrapped a plastic bag over the maf because water seemed to get on it. it seemed to have worked
-ttops leak
-body damage
- wheel vibration
- really shitty rear tires (front tires are great tho)
- it seems someone did put the fuel lines in nicely. seems to leak gas if u fill it all the way up. i just fill it up 3/4th each time.
- shutters at 25% throttle at cruzing speeds, i read that the itb's just needs to be sync'ed. i just give it alittle more or less gas and it stops.
-its probably got blown struts

good
- replaced the master cylinder thing about a year ago
- always changed oil w synthetic every 3k or less (i love castrol edge)
- strong engine and trans
- heat works
- ac seems like it can be made to run. its got the 16v compressor and lines hooked up. and a retro fit kit for r134
- exhaust is great
-clear title

extra stuff
- drilled and sloted rotors
- calipers for 87
- interior parts
- set of seats
- anything aw11 related i have ill give u.

i wanted to keep it and put the engine in a ae86 shell. but i bought a miata instead. so i need this thing gone. it will make it across the country. u can daily it w historic tags if u want. throw the engine in a ae86 or aw11 shell after u beat on this shell some more. i dont care. any questions email me dkpbws2001@yahoo.com



]]> http://forums.ma240sx.net/showthread.php?tid=5234 Fri, 30 Jul 2010 18:58:35 -0600 http://forums.ma240sx.net/showthread.php?tid=5234 oem clutch

---

also will the sr20de clutch work on the sr20det?]]> oem clutch

---

also will the sr20de clutch work on the sr20det?]]> http://forums.ma240sx.net/showthread.php?tid=5233 Fri, 30 Jul 2010 15:34:57 -0600 http://forums.ma240sx.net/showthread.php?tid=5233 http://forums.ma240sx.net/showthread.php?tid=5232 Fri, 30 Jul 2010 08:33:42 -0600 http://forums.ma240sx.net/showthread.php?tid=5232 http://forums.ma240sx.net/showthread.php?tid=5231 Thu, 29 Jul 2010 21:57:37 -0600 http://forums.ma240sx.net/showthread.php?tid=5231 Location Rockville MD 20852
Rbehram@hotmail.com
LMK thanks..


]]> Location Rockville MD 20852
Rbehram@hotmail.com
LMK thanks..


]]> http://forums.ma240sx.net/showthread.php?tid=5230 Thu, 29 Jul 2010 17:12:20 -0600 http://forums.ma240sx.net/showthread.php?tid=5230
sunroof assembly came out of S13 coupe $80.00 OBO


beat up pignose lip $65.00 or best offer

---

its a power sunroof btw!! w/o glass]]>
sunroof assembly came out of S13 coupe $80.00 OBO


beat up pignose lip $65.00 or best offer

---

its a power sunroof btw!! w/o glass]]> http://forums.ma240sx.net/showthread.php?tid=5229 Thu, 29 Jul 2010 16:23:48 -0600 http://forums.ma240sx.net/showthread.php?tid=5229 http://forums.ma240sx.net/showthread.php?tid=5228 Thu, 29 Jul 2010 15:24:16 -0600 http://forums.ma240sx.net/showthread.php?tid=5228
KA clutch fan in good working condition


din Pocket


KADE upper alternator brackets


good working coil from a KA24E



KA24E TPS


Power steering bracket (come with bolts)


another KA clutch Fan (just the clutch)


pig nose bumper (paint its cracked)


]]>
KA clutch fan in good working condition


din Pocket


KADE upper alternator brackets


good working coil from a KA24E



KA24E TPS


Power steering bracket (come with bolts)


another KA clutch Fan (just the clutch)


pig nose bumper (paint its cracked)


]]> http://forums.ma240sx.net/showthread.php?tid=5227 Thu, 29 Jul 2010 14:28:23 -0600 http://forums.ma240sx.net/showthread.php?tid=5227
Rebuilt KA24de
Isis 3" catback exhaust
Intake
Megan track coilovers
Sparco Sprint V bucket seat w/ Nagisa super low rail
Stitch wheels 17x8 +8, 17x9+12
Powered by max RUCA's
Drift knob
300zx front brakes and master cylinder
Blue led lights behind gauge cluster
H4 headlight housing conversion
Viper alarm system
tein tie rods
10" kicker sub
Alpine amp











]]>
Rebuilt KA24de
Isis 3" catback exhaust
Intake
Megan track coilovers
Sparco Sprint V bucket seat w/ Nagisa super low rail
Stitch wheels 17x8 +8, 17x9+12
Powered by max RUCA's
Drift knob
300zx front brakes and master cylinder
Blue led lights behind gauge cluster
H4 headlight housing conversion
Viper alarm system
tein tie rods
10" kicker sub
Alpine amp











]]> http://forums.ma240sx.net/showthread.php?tid=5225 Wed, 28 Jul 2010 22:20:52 -0600 http://forums.ma240sx.net/showthread.php?tid=5225
I prefer pickup but Im also willing to ship


Rear seat belts $20 for both


Stock Lower control arm & tension rod(Leftside only...in great shape just a little dirty there are no bends in the control arm or anything) $30 for both


Jdm magnetic badges...I don't know why i brought these but if you want them they are both your's for $15


Polyurethane subframe bushings $15


The 2 pieces in the middle go around the rear speakers and the other 2 pieces is the carpeting that goes around the side behind the rear seats
all of this for $20(pickup only if you jsut want the carpeting)
]]>
I prefer pickup but Im also willing to ship


Rear seat belts $20 for both


Stock Lower control arm & tension rod(Leftside only...in great shape just a little dirty there are no bends in the control arm or anything) $30 for both


Jdm magnetic badges...I don't know why i brought these but if you want them they are both your's for $15


Polyurethane subframe bushings $15


The 2 pieces in the middle go around the rear speakers and the other 2 pieces is the carpeting that goes around the side behind the rear seats
all of this for $20(pickup only if you jsut want the carpeting)
]]> http://forums.ma240sx.net/showthread.php?tid=5224 Wed, 28 Jul 2010 20:01:14 -0600 http://forums.ma240sx.net/showthread.php?tid=5224
1) Brand new 350Z front gold brembo caliper rebuilt seal kits $70 PU




PM me if you are interested.
Thanks for checking.]]>
1) Brand new 350Z front gold brembo caliper rebuilt seal kits $70 PU




PM me if you are interested.
Thanks for checking.]]> http://forums.ma240sx.net/showthread.php?tid=5223 Wed, 28 Jul 2010 19:43:47 -0600 http://forums.ma240sx.net/showthread.php?tid=5223 va beach

S15 spec r aero spoiler - $170





S15 SR upper intake manifold(no sensors,no throttle body) - $20
THE NON POLISHED ONE, will polish for extra $$$$


]]> va beach

S15 spec r aero spoiler - $170





S15 SR upper intake manifold(no sensors,no throttle body) - $20
THE NON POLISHED ONE, will polish for extra $$$$


]]> http://forums.ma240sx.net/showthread.php?tid=5222 Wed, 28 Jul 2010 17:56:04 -0600 http://forums.ma240sx.net/showthread.php?tid=5222 Contact: SlideStance@live.com / 410-490-2969(VZW) / PM

If any of you that have a silvia front conversion on your cars and maybe bought an aftermarket hood or have a spare one....Would you be willing to let me borrow one from you for a max of a month? while i save for the hood that i actually want.
If not I can buy one in oem shape and condition without major dents or rust. Color does not matter.
I only need it to keep my motor covered and help fit the fenders and such. My car is parked 80% of the week. And i dont like driving on other peoples stuff.

Let me know as soon as any of you could or can. I still need to get the fenders and bumper, so it may not be needed immediately.]]> Contact: SlideStance@live.com / 410-490-2969(VZW) / PM

If any of you that have a silvia front conversion on your cars and maybe bought an aftermarket hood or have a spare one....Would you be willing to let me borrow one from you for a max of a month? while i save for the hood that i actually want.
If not I can buy one in oem shape and condition without major dents or rust. Color does not matter.
I only need it to keep my motor covered and help fit the fenders and such. My car is parked 80% of the week. And i dont like driving on other peoples stuff.

Let me know as soon as any of you could or can. I still need to get the fenders and bumper, so it may not be needed immediately.]]> http://forums.ma240sx.net/showthread.php?tid=5221 Wed, 28 Jul 2010 17:22:54 -0600 http://forums.ma240sx.net/showthread.php?tid=5221



http://www.evasivemotorsports.com/mercha...ry_Code=L1


PM me if you are interested.
PU is Rockville.
Thanks for checking.]]>



http://www.evasivemotorsports.com/mercha...ry_Code=L1


PM me if you are interested.
PU is Rockville.
Thanks for checking.]]> http://forums.ma240sx.net/showthread.php?tid=5220 Wed, 28 Jul 2010 13:41:52 -0600 http://forums.ma240sx.net/showthread.php?tid=5220 Rear rims are 18X9.5 about 3" Lip
offset 30
None are bent.
Minor Curb rash on front 2
Driver rear clear coat has a few spots peeling from either rocks(but no visual damage) or chemicals at car washes.

300$ ill ship at buyers expense. plus paypal These wheels have held up GREAT 4 me

NO TIRES

http://my350z.com/forum/wheels-tires/493...-gold.html

Go to above link for piks. Im from My350z. Price is FIRM.]]> Rear rims are 18X9.5 about 3" Lip
offset 30
None are bent.
Minor Curb rash on front 2
Driver rear clear coat has a few spots peeling from either rocks(but no visual damage) or chemicals at car washes.

300$ ill ship at buyers expense. plus paypal These wheels have held up GREAT 4 me

NO TIRES

http://my350z.com/forum/wheels-tires/493...-gold.html

Go to above link for piks. Im from My350z. Price is FIRM.]]> http://forums.ma240sx.net/showthread.php?tid=5218 Wed, 28 Jul 2010 11:51:51 -0600 http://forums.ma240sx.net/showthread.php?tid=5218 http://forums.ma240sx.net/showthread.php?tid=5217 Wed, 28 Jul 2010 08:47:23 -0600 http://forums.ma240sx.net/showthread.php?tid=5217
]]>
]]>