because if i cruz around in low rpm level then it wont leak, but once i drive it in high rpms(5k n up) i feel like when the oil pressure rises then the oil leak occurs. im pretty sure its the oil pan but it could also be the front main seal..i really cant tell so ill prob do both.
well to replace the front main seal its pretty self explanitiory, remove the belts,use an impact gun to pull the crank pully bolt,pull the pully off,pry out the seal, grease the new seal and with a hammer and a small punch carefully drive the new seal back in place and reasemble! but make sure to grease the new seal alot of people dont and you are right back where you began in the first place.
is there oil all over the sway bar ?... it could go both ways, mabye the oil pan or mabye the front seal.... Art is right alot of people go in dry and ruin the seal if they dont know what their doing.