the guy who gave me my sr harness said that it was a complete harness. i cant find alternator, starter and 02 sensor wires for it. also i did a power steering swap and dont kno where the wire for that goes.
i found out that you need the stock lower harness from your stock 240 to complete it. i just found it but i dont know how or where to wire it up.
could anyone help me out? or come finish the wiring.
willing to pay.
Like I told you over email, wiring is never as simple as you think. Otherwise, it would have already been done.
Your harness sounds like it's missing a bunch of stuff. It may or may not be salvageable.
Any shop would be pressed to accept wiring work like this. Most will just turn your car away because they don't have the time and/or expertise to go through the entire body harness and engine harness wire by wire, connector by connector to find the problem.
it just needed some stuff connected on the lower harness. he needs a knock sensor and to trace out the wires for the reverse sensor and get a positive terminal for a S13 so he can plug the lower harness into it. took all of 30 mins to get done.
(11-19-2009 06:16 PM)HKS SR20 Wrote: [ -> ]it just needed some stuff connected on the lower harness. he needs a knock sensor and to trace out the wires for the reverse sensor and get a positive terminal for a S13 so he can plug the lower harness into it. took all of 30 mins to get done.
Good then. I had no idea what's going on when he emailed me.
yea i didnt kno what was going on myself.
yea austin came out and fixed it for me
AUSTIN IS AWESOME!!!!!!!!!!!!!!!!!!
does that mean your coming to the MA meet tomorroW?